MS22C-8
Front open multi spindle automatic for bar machining
- 8 separately driven motor spindles with C-axis capabilities
- Speed control for optimal cutting speeds, favorable chip breaking, and short cycle times
- High dynamics exhibiting all CNC advantages
- Particularly suitable for part families due to flexible setup and fast changeover
- Complete machining with driven tools in all spindle positions
- Extremely fast swivelling synchronous spindles
- Maximum of 6 tools for rear end machining per swiveling synchronous spindle
- C-axis and multi-edge turning for extended use options
The construction
The CNC multi-spindle automatics MS22C is designed as modular system. It can be equipped with up to 62 axes, 16 CNC compound slides, Y axes, optionally two synchronous spindles and six tools for backworking, a maximum of two which are driven. The V-haped arrangement of the tool carrier in every spindle position guarantees that only the tool holder determines the type of machining. Thus, external and internal machining can be carried out with fixed or driven tools at every station.
The double four-spindle machine is an interesting upgrade option.
Benefit: Additional part production time reduction due to simultaneous manufacturing of 2 workpieces.
With the same configuration level the machine can be also used as an 8-spindle machine with simultaneous rear end machining in two spindle positions.
Benefit: Reduced cycle time with time-determining backworking.
View into the work area
The known advantages of the INDEX CNC multi-spindle automatics, such as the hollow-shaft motor technology in all work spindles and the optimum selection of the cutting data via the CNC program, are also integrated in the MS22C-8. The C axis existing in all spindle positions also allows the complete machining of complex workpieces in short time. Due to optionally available Y- axes, eccentric machining can be carried out in addition. The front-open design in combination with the intelligent arrangement of the tool carriers allows the end slide block to be omitted. This guarantees a free chip fall and thus a high process safety.
Technical data
|
|
|
8 |
|
Bar capacity max. |
mm |
22 (24) |
|
Power at 100% / 25% |
kW |
8,7 / 15 |
|
Torque at 100 / 25% |
Nm |
10 / 18 |
|
Speed max. * |
rpm |
10000 |
|
Tool carriers |
|
|
|
Number of tool carriers |
|
16 |
|
Travel X / Z / Y |
mm |
62 / 85 / 24 |
|
Synchronous spindle |
|
1/2 |
|
Bar capacity max. |
mm |
22 (24) |
|
Power at 100 / 40% |
kW |
9,2 / 12 |
|
Torque at 100 / 40% |
Nm |
11 / 14 |
|
Swiveling angle |
degrees |
138 |
|
Travel Z |
mm |
120 |
|
Speed max. |
rpm |
10000 |
| Number of tools for backworking | 3/6 | |
|
Dimensions |
|
|
|
L x W x H (without loading magazine) |
mm |
3349 x 2030 x 2854 |
| Control | INDEX C200-4D (Siemens 840D solutionline) | |
| * Speed limitations are necessary, depending on bar diameter, bar guide and workpiece clamping | ||
|
| ||
Subject to change without notice.