G400
Turn-Mill Center with unique mill power
- Main and counter spindle with the same design and power
- Flexibility and short set-up times due to the multifunctional units and automatic tool magazines
- Short tool change travels and reduced chip-to-chip times
- Full 5 axis interpolation for the machining of the most complex contours
- Driven tools for all machining tasks in C, Y and B axis
- True Turn-Mill Center with up to 2 motor milling spindles
The modular building block system
You decide on the configuration of the machine. The clearly structured building block system offers the distinct advantage of incorporating exactly those functions into the machine that are necessary for your applications – not more, not less.
View into the work area
Producing large sized workpieces with a wide product variety is the strength of the Turn-Mill Center G400. Complex machining in short cycle times are realized due to a broad range of options and components. A special variation counts the high-end solution with two motor milling spindles. It assures economic 6side machining of workpieces with a high share of milling operations.
Technical data
|
|
|
|
| |
| Swing diameter max. | mm | 630 |
| |
| Workspindles |
|
|
| |
| Bar capacity max. | mm | 90 | 102 | |
| Speed max. | rpm | 3500 | 3000 | |
| Power at 40% | kW | 57 | 67 | |
| Torque at 40% | Nm | 363 | 900 | |
| Chuck size max. | mm | 315 | 400 | |
| C-axis, gear box |
|
|
| |
| Tool carrier |
|
|
| |
| Tool stations (Turret 1 / 2 / 3) |
| 12 / 10 / 12 |
| |
| Driven tools (Turret 1 / 2 / 3) |
| 12 / 10 / 12 |
| |
| Multi Functions Units 1 and 3 |
|
|
| |
| Power at 25% | kW | 17 |
| |
| Torque at 25% | Nm | 36 / 144 |
| |
| Speed max. | rpm | 6000 / 1500 |
| |
| Motor Milling Spindles 1 and 2 |
|
|
| |
| Power at 100% | kW | 27.5 |
| |
| Torque at 25% | Nm | 115 |
| |
| Speed max. | rpm | 12000 / 18000 |
| |
| Dimensions |
|
|
| |
| L x W x H | mm | 5350 / 6300 x 2760 x 2610 | ||
Subject to change without notice.