MS32P
Multi spindle automatic for complex parts
- 6 separately driven motor spindles with C-axis capabilities
- Speed control for optimal cutting speeds, favorable chip breaking, and short cycle times
- 10 independently working CNC-controlled tool slides, optionally with one or two axis
- 7 additional one or two axis tool slides for manufacturing complex workpieces
- Particularly suitable for part families due to flexible setup and fast changeover
- Complete machining with driven tools in all spindle positions
- High dampening effect of hydrostatically guided Z-axis
- Backworking with synchronized pickup spindle and 3 tools
The construction
The MS32P offers up to 17 tool carriers and up to 2 tools on most tool carriers. The machine is equipped with a second opposed headstock housing. This housing can be equipped with up to 7 additional compound slides and up to 2 counter spindles. The compound slides are identical with those on the main spindle headstock. The counter spindle will also pick up the work piece during cutoff for backworking.
View into the work area
A multi spindle automatic that can tackle almost any job. The MS32P is mainly utilized if complex parts requiring many tool carriers with a large number of tools have to be produced, and where longer parts require machining on the cutoff side. The application range of the MS32P can hardly be surpassed.
Technical data
|
|
|
|
|
Bar capacity max. |
mm |
32 |
|
Power at 100% |
kW |
4 |
|
Torque at 100% |
Nm |
15 |
|
Speed max. |
rpm |
6300 |
|
C-axis |
|
|
|
Tool carriers |
|
|
|
Number (on carrier 1) |
|
10 |
|
Number (on carrier 2) |
|
7 |
|
Axis X / Z / Y |
mm |
68 / 160 / 32 |
|
Synchronous spindle |
|
|
|
Chuck size max. |
mm |
95 |
|
Power at 25% |
kW |
2 x 15,5 |
|
Torque at 25% |
Nm |
2 x 37,5 |
|
Speed max. |
rpm |
6300 |
|
Backworking tools |
|
3 |
|
Dimensions |
|
|
|
L x W x H (with loader) |
mm |
8696 x 1380 x 2400 |
| Control | INDEX C200-4D (Sinumerik 840D) | |
Subject to change without notice.